Our BMW cars will be regularly repaired and maintained for a long time, and there will be a project in the process -- waxing. To wax a car is to restore it to its shiny condition. So what do you do when you wax your car?

　　先給車打蠟，場地很重要。濟南哪里有寶馬汽車維修的指出，車蠟含有有害的化學成分，具有刺激性和毒性，所以汽車打蠟要選擇開闊開闊的地方。此外，還要注意不要在強烈的陽光下打蠟，因為強烈的陽光會使車漆面發燙，過熱的車漆面會降低車蠟的附著力，從而影響打蠟的效果。

　　Wax the car first. The venue is important. Ji 'nan where BMW car maintenance pointed out that the car wax contains harmful chemical components, with irritation and toxicity, so the car wax to choose open and open places. In addition, we should also pay attention not to wax in strong sunlight, because strong sunlight will make the car paint hot, overheating car paint will reduce the adhesion of the car wax, thus affecting the effect of waxing.

　　在給汽車打蠟之前，記得清潔汽車，臟車不能打蠟，因為灰塵有小棱角。打蠟時反復來回摩擦，這些細小灰塵會損壞漆面，得不償失，洗完車就可以開始打蠟了。打蠟前，先觀察汽車哪些部位有小傷痕，疤痕小的地方在打蠟的時候可以更仔細的處理。但是對于比較嚴重的劃痕，打蠟是無法修復的，需要去專業的美容店噴漆。

　　Remember to clean your car before waxing it. Dirty cars should not be waxed because dust has small corners. When waxing, rub back and forth repeatedly, these tiny dust can damage paint surface, outweighed the cost, wash the car can begin waxing. Before waxing, observe the car which parts have small scars, scars in the small place when waxing can be more carefully processed. But for more serious scratches, waxing is unable to repair, the need to go to a professional beauty shop spray paint.

　　打蠟前需要準備的周邊產品也要準備好，產品中通常包含用于打蠟的海綿和毛巾等工具。在這里建議車主自己準備一副手套，因為車蠟比較刺激。直接接觸皮膚很容易引起過敏反應，對皮膚的傷害也很大。一副橡膠手套可以很好地保護雙手。做好以上準備工作后，接下來就是開始給汽車打蠟了。

　　The peripheral products that need to be prepared before waxing should also be prepared. The products usually include tools such as sponges and towels for waxing. It is recommended that the owner prepare a pair of gloves, because the car wax is more exciting. Direct contact with the skin is easy to cause allergic reactions, the skin is also very harmful. A pair of rubber gloves will protect your hands well. With the above preparations in place, the next step is to start waxing the car.

　　打蠟方法：先把車蠟涂在海綿上，注意一次不要涂太多，然后把車蠟畫成n字形半圓形，把車蠟按緊的順序涂在車漆面上。車蠟干燥后，用毛巾將其插入。仔細擦的時候，可以用一點力，使蠟更均勻地在車漆表面形成一層蠟膜。這樣就完成了整個打蠟過程。

　　Waxing method: first paint the car wax on the sponge, pay attention not to paint too much at a time, and then paint the car wax into an N-shaped semicircle, and paint the car wax on the car paint in a tight order. After the wax dries, insert it with a towel. When carefully rubbed, a little force can be used to make the wax more evenly form a layer of wax film on the surface of the car paint. This completes the waxing process.

　　所以您對自己動手給愛車打蠟感興趣嗎？以上的內容可以借鑒，但具體的事項建議去咨詢專業人員，當然您也可以來我們網站http://www.nanofluidizer.com咨詢。

　　So are you interested in waxing your own car? Can draw lessons from the content of the above, but specific advice to consult a professional, of course you can come to our website http://www.nanofluidizer.com.