車輛的日常維護是各級維護和保證車輛正常運行的基礎，以清潔、補給和安全檢視為作業內容，對汽車外觀、發動機外表進行清潔，保持車容整潔等。那么，您知道在汽車出車前以及行車時的維護作業有什么嗎？下面
濟南沃爾沃汽車養護廠家來為您講講：
The daily maintenance of vehicles is the foundation for maintaining and ensuring the normal operation of vehicles at all levels, with cleaning, replenishment, and safety inspection as the central task. It is necessary to clean the appearance of the car and engine, and maintain a clean and tidy appearance. So, do you know what maintenance work is done before and during the operation of the car? Let's talk about the maintenance manufacturer of Jinan Volvo Cars for you:
汽車出車前維護作業內容
Maintenance tasks before vehicle departure
(])清潔汽車外表。
Clean the exterior of the car.
(2)檢查|門]窗玻璃、玻璃升降、刮水器、后視鏡、內視鏡和門]鎖等是否有效安全。
(2) Check whether the doors, window glass, window regulator, wipers, rearview mirrors, interior mirrors, and door locks are effective and safe.
(3)檢查冷卻水量、潤滑油量、液壓制動液量、燃油量、蓄電池電解液量是否充足,并檢查上述液體容器的蓋是否齊全有效。
(3) Check if the cooling water volume, lubricating oil volume, hydraulic brake fluid volume, fuel volume, and battery electrolyte volume are sufficient, and check if the lids of the above liquid containers are complete and effective.
(4)檢查牌照、喇叭、燈具是否齊全有效。
(4) Check if the license plate, horn, and lighting fixtures are complete and effective.
(5)檢查轉向機構各連接部位是否牢可靠。
(5) Check whether the connection parts of the steering mechanism are secure and reliable.
(6)檢查輪胎氣壓是否合乎標準，輪胎螺栓是否松動,并清除胎紋間雜物。汽車維修技術網
(6) Check whether the tire pressure meets the standard, whether the tire bolts are loose, and remove debris between the tire tread. Automotive Maintenance Technology Network
(7)檢查轉向盤自由轉動量，離合器踏板自由行程是否正常。
(7) Check whether the free rotation of the steering wheel and the free travel of the clutch pedal are normal.
(8)檢查鋼板彈簧及U形螺栓是否完好緊固。
(8) Check if the steel plate springs and U-bolts are intact and tightened.
(9)檢查發動機運轉中有無異響及各儀表工作是否正常。
(9) Check whether there is abnormal noise during engine operation and whether all instruments work normally.
(10)檢查有否漏水、漏油、漏氣、漏電。
(10) Check for water, oil, gas, or electrical leakage.
(11)檢查車廂和貨物裝載情況是否符合裝載規定和拖掛裝駱是否牢固可靠。
(11) Check whether the loading of the carriage and goods complies with the loading regulations and whether the trailer is securely and reliably loaded.
(12)檢查隨車裝備和工具是否齊全,并隨帶必要的備件和配件。
(12) Check if the onboard equipment and tools are complete, and bring necessary spare parts and accessories with you.
(13)檢查行車證照是否齊全。
(13) Check if the driving license is complete.
汽車行車中維護作業內容
Maintenance work content during vehicle operation
(1)汽車起步行駛后，試驗離合器、制動器、和轉向系的工作狀況。
(1) After the car starts driving, test the working conditions of the clutch, brake, and steering system.
(2)汽車行駛中發現有下列情況之一者應立即停車檢查排除:
(2) If one of the following situations is found during driving, the vehicle should be immediately stopped for inspection and troubleshooting:
①發動機熄火、工作不穩、溫度過高。
① Engine stalling, unstable operation, high temperature.
②發動機或底盤有異響和氣味。
② There is abnormal noise and odor from the engine or chassis.
③儀表工作失常或失效。
③ The instrument is malfunctioning or malfunctioning.
④制動器失靈或制動氣壓低于警戒值(氣壓表紅色部分)。
④ The brake fails or the brake air pressure is lower than the warning value (red part of Barometer).
⑤轉向機構工作失常。
⑤ The steering mechanism is malfunctioning.
⑥輪胎有明顯的漏氣或嚴重損壞。
⑥ The tire has obvious air leakage or severe damage.
⑦離合器工作失常。
⑦ The clutch is not working properly.
That's all for the maintenance work before and during the operation of the car. I hope it can be helpful to you. For more information, please come to our website http://www.nanofluidizer.com consulting service
